Global Butterfly valve Manufacturers from USA/Europe/Korea/ China Sizes: 1/2" up to 36" Pressure :Class 150 to 600 . Material : Ductile iron, carbon steel, stainless steel, Aluminium Bronze to exotic Duplex SS, Monel and etc. Different types: Rubberlined concentric, High performance and triple offset. Design according to API 609.

The H-500 Ham-Let Valve is a moderate-pressure instrumentation Ball Valve for general service and instrumentation panels. The valves offer large ports for high flow, tight shutoff, long-life service and low operating torque. The H-500 Series can be used for bi-directional flow, is rated to max. 3000 psig (204 Bar) and performs on/off service. Precision Investment cast body in CF8M stainless steel Precision Investment cast end caps in CF3M stainless steel Blow-out proof stem with Belleville washer design for long life stem sealing Manual Operation with integral locking device Flow coefficient (Cv) from 1.2 to 24.0 MAWP 3000 psig (204 Bar) MAWT 450°F (232°C) Size: 1/4; 3/8; 1/2; 3/4 and 1 inch H-500S is available with TFM1600 seat material as standard.  

DESIGN: ASME B16.34/ API 6D/ API 599 DIN-EN: DN 15 – 600 / PN 10 – 40 ASME: NPS ½“ – 24“ / class 150 – 300 PT range: -30 < T < 210°C, vacuum tight Standard body materials

• Ductile cast iron ENJS 1049, ASTM Gr 60-40-18 / A395

Standard plug materials

• Stainless Steel 1.4308, ASTM A351 CF8
• Ductile cast iron ENJS 1049, ASTM Gr 60-40-18 / A395

Special materials

• Carbon Steel 1.0619, ASTM A216 WCB
• Stainless Steel 1.4408, ASTM A351 CF8M
• Unalloyed stainless steel casting (low Temp.) 1.1138, LCC/LCB/A352

DESIGN: ASME B16.34/ API 6D/ API 599 DIN-EN: DN 15 – 600 / PN 10 – 40 ASME: NPS ½“ – 24“ / class 150 – 300 PT range: -30 < T < 210°C, vacuum tight Standard body materials

• Ductile cast iron ENJS 1049, ASTM Gr 60-40-18 / A395

Standard plug materials

• Stainless Steel 1.4308, ASTM A351 CF8
• Ductile cast iron ENJS 1049, ASTM Gr 60-40-18 / A395

Special materials

• Carbon Steel 1.0619, ASTM A216 WCB
• Stainless Steel 1.4408, ASTM A351 CF8M
• Unalloyed stainless steel casting (low Temp.) 1.1138, LCC/LCB/A352

Square or rectangular sliding channel gate, with fixed parts embedded in concrete and seals on 3 sides. Used for on-off or control applications in open channels. Carbon or stainless steel fabricated construction, with tight sealing by means of an elastomer seal. Available in a wide range of dimensions and for many different pressure heads. Actuator: Handwheel, Pneumatic, Electric or Hydraulic, with a wide variety of actuator extensions available.

A one piece ball valve has a body and end connections formed from a single piece of material. This construction presents a comparatively reduced number of opportunities for leakage. The valve trim and seals are inserted through one of the end connections. This type of valve will not have a port size equal to the line size. The simplicity of the one piece body design tends to make their cost lower than the other versions. Once the valve is in place, it cannot be serviced without removing the entire valve assembly from the piping system.  

• Available in barstock or investment cast construction
• 2000WOG rating
• Carbon Steel or CF8M Stainless bodies
• Plated carbon steel or 316SS trim
• ¼” to 2” size range
• API 607 5th Edition Fire-safe(OPTION)