Angle piston valve is for water and steam applications due to its high quality, reliability and competitive prices. The valves feature stainless steel and bronze bodies with 180 degrees C PTFE seals as standard. Available with optional 4-20mA or 0-10v modulating control. Also available with 200 degrees C seals, manual...
Aseptic valves, are most often found in industries that require high levels of purity. These include manufacturers of injection drugs, cosmetics, microelectronics, and the like. Aseptic valves are used here to control processes and minimize contamination from environmental sources.
Another advantage of our UHP Valve is its outstanding durability and low maintenance, as it offers over 100 million life cycles. The UF series meets the demand for high-precision diaphragm valves that can perform accurately and repeatedly over an extremely large number of cycles, required by ALD applications
Body: SS316L, Alloy C- 22( Alloy 22)
The diaphragm valve is straightforward to manufacture and maintain. Also, with no moving metallic parts to come to contact with the process fluid and no dead spaces it is ideal for applications where cleanliness is paramount.
Especially as it can be cleaned in place(CIP)
was last modified: September 12th, 2018 by webthuythu
Global Butterfly valve Manufacturers from USA/Europe/Korea/ China
Sizes: 1/2" up to 36"
Pressure :Class 150 to 600 .
Material : Ductile iron, carbon steel, stainless steel, Aluminium Bronze to exotic Duplex SS, Monel and etc.
Different types: Rubberlined concentric, High performance and triple offset.
Design according to API 609.
The H-500 Ham-Let Valve is a moderate-pressure instrumentation
Ball Valve for general service and instrumentation panels.
The valves offer large ports for high flow, tight shutoff, long-life
service and low operating torque.
The H-500 Series can be used for bi-directional flow, is rated to
max. 3000 psig (204 Bar) and performs on/off service.
Precision Investment cast body in CF8M stainless steel
Precision Investment cast end caps in CF3M stainless steel
Blow-out proof stem with Belleville washer design for long life stem sealing
Manual Operation with integral locking device
Flow coefficient (Cv) from 1.2 to 24.0
MAWP 3000 psig (204 Bar)
MAWT 450°F (232°C)
Size: 1/4; 3/8; 1/2; 3/4 and 1 inch
H-500S is available with TFM1600 seat material as standard.
Square or rectangular sliding channel gate, with fixed parts embedded in concrete and seals on 3 sides.
Used for on-off or control applications in open channels.
Carbon or stainless steel fabricated construction, with tight sealing by means of an elastomer seal.
Available in a wide range of dimensions and for many different pressure heads.
Actuator: Handwheel, Pneumatic, Electric or Hydraulic, with a wide variety of actuator extensions available.
A one piece ball valve has a body and end connections formed from a single piece of material. This construction presents a comparatively reduced number of opportunities for leakage. The valve trim and seals are inserted through one of the end connections. This type of valve will not have a port size equal to the line size. The simplicity of the one piece body design tends to make their cost lower than the other versions. Once the valve is in place, it cannot be serviced without removing the entire valve assembly from the piping system.
Available in barstock or investment cast construction
Two piece ball valves generally have one piece that includes an end connection and the body, plus a second piece that fits into the first that will hold the trim in place and provide the second end connection. The construction presents an additional leak potential where the two pieces are joined, but also allows disassembly of the valve for replacement of the internals. These valves can provide full port service and bidirectional flow shutoff.
Available in Brass, Bronze, Carbon Steel, Stainless Steel construction
Global Knife Gate valve Manufacturers from USA/Europe/Korea.
Sizes:
DN 50 to DN 1200 (larger diameters on request)
Working pressure:
DN 50 to DN 250: 10 kg/cm2
DN 300 to DN 400: 6 kg/cm2
DN 450: 5 kg/cm2
DN 500 to DN 600: 4 kg/cm2
DN 700 to DN 1200: 2 kg/cm2Standard flange connection:
EN1092 PN10 and ANSI B16.5 (class 150)
Note: other flange connections (on request):
EN1092 PN6/16/25
BS D and E
ANSI 125
was last modified: December 30th, 2021 by webthuythu
A three piece ball valve essentially separates the connection portions of the valve assembly from the body of the valve. These will be more expensive than either of the other two types, but their allowance for removing the valve body and trim from the piping system while leaving the connections in place may prove valuable for many applications. Full port and bidirectional shutoff can be provided by this construction.
Size range :¼"- 2" (DN8 - DN50)
Pressure range: ANSI Class 900 | Vacuum 10-6 Tor to 155 bar (2250 psi)
Size range: 21 / 2"-6" (DN65 - DN150)
Pressure range: ANSI Class 400 | Vacuum 10-6 Tor to 70 bar (1000 psi)
Temperature range: -60 °C to +260 °C (-76 °F to +500 °F)
Materials : Stainless steel A351 CF8M, carbon steel A216 WCB, Aluminium Bronze, Hastelloy alloy C22, alloy C276, duplex, super duplex, 254SMO, inconel 625, monel 400, titanium and more
End connections: Threaded, welded, flanged
Operation: Lever or gear operated, pneumatic or electric actuated